Effect of Temperature and PH on Wettability Alteration and Adsorption of Amphiphilic Polymer-Coated SiO<sub>2</sub> Nanoparticle on Oil-Wet Porous Media

Hamid Daneshmand

doi:doi:10.11648/j.ogce.20210905.11

| Peer-Reviewed

Effect of Temperature and PH on Wettability Alteration and Adsorption of Amphiphilic Polymer-Coated SiO₂ Nanoparticle on Oil-Wet Porous Media

Hamid Daneshmand

Published in International Journal of Oil, Gas and Coal Engineering (Volume 9, Issue 5)

Received: 17 May 2021 Accepted: 10 July 2021 Published: 5 October 2021

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Wettability alteration of the oil-wet reservoir rocks to the water-wet state is an important factor for enhanced oil recovery (EOR). One of the main challenges of applying nanoparticles for wettability alteration is related to the colloidal stability and poor adsorption of the nanofluids in the harsh conditions of the reservoirs. In the present work, comparative studies were followed between polymer-coated silica nanoparticles by polyethylene glycol (Mn ~ 2000) and amphiphilic polymer-coated silica nanoparticles by polyethylene glycol (Mn ~ 2000 or 5000) and propyl chains to determine wettability alteration and adsorption of these modified nanoparticles on porous media. Water contact angle and UV–Vis adsorption measurements showed which the efficiency of amphiphilic polymer-coated nanoparticles depends on the wettability state of glass and it was improved significantly by oil-wet glass substrates due to the existence of the hydrophobic polymer on the surface of the nanoparticles. Moreover, effective parameters including temperature, and pH were studied. The better performance was obtained for the modified silica nanoparticles by polyethylene glycol (Mn ~ 5000) and propyl chains at 1000 ppm concentration in pH of 6 and the temperature range of 25-55°C. Our study demonstrated amphiphilic polymer-coated silica nanoparticles can be considered as a promising agent which has the potential for EOR purposes.

Published in	International Journal of Oil, Gas and Coal Engineering (Volume 9, Issue 5)
DOI	10.11648/j.ogce.20210905.11
Page(s)	63-70
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2021. Published by Science Publishing Group

Keywords

Wettability, Adsorption, Silica Nanoparticle, Enhanced Oil Recovery

References

[1]	Y. Kazemzadeh, S. Shojaei, M. Riazi, and M. Sharifi, "Review on application of nanoparticles for EOR purposes: A critical review of the opportunities and challenges," Chinese Journal of Chemical Engineering, vol. 27, no. 2, pp. 237-246, 2019.
[2]	K. Guo, H. Li, and Z. Yu, "In-situ heavy and extra-heavy oil recovery: A review," Fuel, vol. 185, pp. 886-902, 2016.
[3]	M. A. Buijse, K. Tandon, S. Jain, J.-W. Handgraaf, and J. Fraaije, "Surfactant optimization for EOR using advanced chemical computational methods," in SPE Improved oil recovery symposium, 2012: Society of Petroleum Engineers.
[4]	B. Y. Jamaloei and R. Kharrat, "Analysis of microscopic displacement mechanisms of dilute surfactant flooding in oil-wet and water-wet porous media," Transport in porous media, vol. 81, no. 1, p. 1, 2010.
[5]	X. Zhao, M. J. Blunt, and J. Yao, "Pore-scale modeling: Effects of wettability on waterflood oil recovery," Journal of Petroleum Science and Engineering, vol. 71, no. 3-4, pp. 169-178, 2010.
[6]	H. Zhang, T. Ramakrishnan, A. Nikolov, and D. Wasan, "Enhanced oil displacement by nanofluid’s structural disjoining pressure in model fractured porous media," Journal of colloid and interface science, vol. 511, pp. 48-56, 2018.
[7]	J. Giraldo, P. Benjumea, S. Lopera, F. B. Cortés, and M. A. Ruiz, "Wettability alteration of sandstone cores by alumina-based nanofluids," Energy & Fuels, vol. 27, no. 7, pp. 3659-3665, 2013.
[8]	B. M. Huibers et al., "Wettability alteration of sandstones by silica nanoparticle dispersions in light and heavy crude oil," Journal of Nanoparticle Research, vol. 19, no. 9, p. 323, 2017.
[9]	L. N. Nwidee, S. Al-Anssari, A. Barifcani, M. Sarmadivaleh, M. Lebedev, and S. Iglauer, "Nanoparticles influence on wetting behaviour of fractured limestone formation," Journal of Petroleum Science and Engineering, vol. 149, pp. 782-788, 2017.
[10]	S. Al-Anssari, A. Barifcani, S. Wang, L. Maxim, and S. Iglauer, "Wettability alteration of oil-wet carbonate by silica nanofluid," Journal of colloid and interface science, vol. 461, pp. 435-442, 2016.
[11]	M. Zargartalebi, R. Kharrat, and N. Barati, "Enhancement of surfactant flooding performance by the use of silica nanoparticles," Fuel, vol. 143, pp. 21-27, 2015.
[12]	D. Wang, H. Duan, and H. Möhwald, "The water/oil interface: the emerging horizon for self-assembly of nanoparticles," Soft Matter, vol. 1, no. 6, pp. 412-416, 2005.
[13]	R. Songolzadeh and J. Moghadasi, "Stabilizing silica nanoparticles in high saline water by using ionic surfactants for wettability alteration application," Colloid and Polymer Science, vol. 295, no. 1, pp. 145-155, 2017.
[14]	S. Al-Anssari, M. Arif, S. Wang, A. Barifcani, and S. Iglauer, "Stabilising nanofluids in saline environments," Journal of colloid and interface science, vol. 508, pp. 222-229, 2017.
[15]	S. Al-Anssari, M. Arif, S. Wang, A. Barifcani, M. Lebedev, and S. Iglauer, "Wettability of nanofluid-modified oil-wet calcite at reservoir conditions," Fuel, vol. 211, pp. 405-414, 2018.
[16]	L. N. Nwidee, M. Lebedev, A. Barifcani, M. Sarmadivaleh, and S. Iglauer, "Wettability alteration of oil-wet limestone using surfactant-nanoparticle formulation," Journal of colloid and interface science, vol. 504, pp. 334-345, 2017.
[17]	L. Hendraningrat, L. Shidong, and O. Torsaeter, "A glass micromodel experimental study of hydrophilic nanoparticles retention for EOR project," in SPE Russian Oil and Gas Exploration and Production Technical Conference and Exhibition, 2012: Society of Petroleum Engineers.
[18]	H. ShamsiJazeyi, C. A. Miller, M. S. Wong, J. M. Tour, and R. Verduzco, "Polymer-coated nanoparticles for enhanced oil recovery," Journal of applied polymer science, vol. 131, no. 15, 2014.
[19]	S. Mihajlović, Ž. Sekulić, A. Daković, D. Vučinić, V. Jovanović, and J. Stojanović, "Surface properties of natural calcite filler treated with stearic acid," Ceramics–Silikáty, vol. 53, no. 4, pp. 268-275, 2009.
[20]	X. Shi, R. Rosa, and A. Lazzeri, "On the coating of precipitated calcium carbonate with stearic acid in aqueous medium," Langmuir, vol. 26, no. 11, pp. 8474-8482, 2010.
[21]	A. Behzadi and A. Mohammadi, "Environmentally responsive surface-modified silica nanoparticles for enhanced oil recovery," Journal of Nanoparticle Research, vol. 18, no. 9, p. 266, 2016.
[22]	K. Jradi, C. Daneault, and B. Chabot, "Chemical surface modification of glass beads for the treatment of paper machine process waters," Thin solid films, vol. 519, no. 13, pp. 4239-4245, 2011.
[23]	G. Arslan, M. Özmen, B. Gündüz, X. Zhang, and M. Ersöz, "Surface modification of glass beads with an aminosilane monolayer," Turkish Journal of Chemistry, vol. 30, no. 2, pp. 203-210, 2006.
[24]	K. Mader-Arndt et al., "Single particle contact versus particle packing behavior: model based analysis of chemically modified glass particles," Granular Matter, vol. 16, no. 3, pp. 359-375, 2014.
[25]	A. Roustaei and H. Bagherzadeh, "Experimental investigation of SiO 2 nanoparticles on enhanced oil recovery of carbonate reservoirs," Journal of Petroleum Exploration and Production Technology, vol. 5, no. 1, pp. 27-33, 2015.
[26]	C. Omurlu, H. Pham, and Q. Nguyen, "Interaction of surface-modified silica nanoparticles with clay minerals," Applied Nanoscience, vol. 6, no. 8, pp. 1167-1173, 2016.
[27]	S. Iglauer, C. Pentland, and A. Busch, "CO2 wettability of seal and reservoir rocks and the implications for carbon geo-sequestration," Water Resources Research, vol. 51, no. 1, pp. 729-774, 2015.
[28]	H. Daneshmand, M. Araghchi, M. Karimi, M. Asgary, “Effects of Adding Nanosilica on Acrylic and Siloxane Hydrophobic Coatings to Protect Calcite Stones, Iranian Journal of Polymer Science and Technology, Vol. 32, pp. 15-29, 2019.
[29]	M. Rostami, M. Mohseni, and Z. Ranjbar, "Investigating the effect of pH on the surface chemistry of an amino silane treated nano silica," Pigment & Resin Technology, 2011.
[30]	S. Al-Anssari, S. Wang, A. Barifcani, M. Lebedev, and S. Iglauer, "Effect of temperature and SiO₂ nanoparticle size on wettability alteration of oil-wet calcite," Fuel, vol. 206, pp. 34-42, 2017.
[31]	S. Al-Anssari, M. Arif, S. Wang, A. Barifcani, M. Lebedev, and S. Iglauer, "Wettability of nano-treated calcite/CO2/brine systems: Implication for enhanced CO2 storage potential," International Journal of Greenhouse Gas Control, vol. 66, pp. 97-105, 2017.
[32]	L. Hendraningrat, S. Li, and O. Torsater, "Effect of some parameters influencing enhanced oil recovery process using silica nanoparticles: an experimental investigation," in SPE Reservoir Characterization and Simulation Conference and Exhibition, 2013: Society of Petroleum Engineers.
[33]	H. Daneshmand, M. Rezaeinasab, M. Asgary, M. Karimi, “Wettability alteration and retention of mixed polymer-grafted silica nanoparticles onto oil-wet porous medium,” Petroleum Science, pp. 1-21, 2021.

Cite This Article

Plain Text BibTeX RIS

APA Style

Hamid Daneshmand. (2021). Effect of Temperature and PH on Wettability Alteration and Adsorption of Amphiphilic Polymer-Coated SiO2 Nanoparticle on Oil-Wet Porous Media. International Journal of Oil, Gas and Coal Engineering, 9(5), 63-70. https://doi.org/10.11648/j.ogce.20210905.11

Copy | Download

ACS Style

Hamid Daneshmand. Effect of Temperature and PH on Wettability Alteration and Adsorption of Amphiphilic Polymer-Coated SiO2 Nanoparticle on Oil-Wet Porous Media. Int. J. Oil Gas Coal Eng. 2021, 9(5), 63-70. doi: 10.11648/j.ogce.20210905.11

Copy | Download

AMA Style

Hamid Daneshmand. Effect of Temperature and PH on Wettability Alteration and Adsorption of Amphiphilic Polymer-Coated SiO2 Nanoparticle on Oil-Wet Porous Media. Int J Oil Gas Coal Eng. 2021;9(5):63-70. doi: 10.11648/j.ogce.20210905.11

Copy | Download

@article{10.11648/j.ogce.20210905.11,
  author = {Hamid Daneshmand},
  title = {Effect of Temperature and PH on Wettability Alteration and Adsorption of Amphiphilic Polymer-Coated SiO2 Nanoparticle on Oil-Wet Porous Media},
  journal = {International Journal of Oil, Gas and Coal Engineering},
  volume = {9},
  number = {5},
  pages = {63-70},
  doi = {10.11648/j.ogce.20210905.11},
  url = {https://doi.org/10.11648/j.ogce.20210905.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ogce.20210905.11},
  abstract = {Wettability alteration of the oil-wet reservoir rocks to the water-wet state is an important factor for enhanced oil recovery (EOR). One of the main challenges of applying nanoparticles for wettability alteration is related to the colloidal stability and poor adsorption of the nanofluids in the harsh conditions of the reservoirs. In the present work, comparative studies were followed between polymer-coated silica nanoparticles by polyethylene glycol (Mn ~ 2000) and amphiphilic polymer-coated silica nanoparticles by polyethylene glycol (Mn ~ 2000 or 5000) and propyl chains to determine wettability alteration and adsorption of these modified nanoparticles on porous media. Water contact angle and UV–Vis adsorption measurements showed which the efficiency of amphiphilic polymer-coated nanoparticles depends on the wettability state of glass and it was improved significantly by oil-wet glass substrates due to the existence of the hydrophobic polymer on the surface of the nanoparticles. Moreover, effective parameters including temperature, and pH were studied. The better performance was obtained for the modified silica nanoparticles by polyethylene glycol (Mn ~ 5000) and propyl chains at 1000 ppm concentration in pH of 6 and the temperature range of 25-55°C. Our study demonstrated amphiphilic polymer-coated silica nanoparticles can be considered as a promising agent which has the potential for EOR purposes.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Effect of Temperature and PH on Wettability Alteration and Adsorption of Amphiphilic Polymer-Coated SiO2 Nanoparticle on Oil-Wet Porous Media
AU  - Hamid Daneshmand
Y1  - 2021/10/05
PY  - 2021
N1  - https://doi.org/10.11648/j.ogce.20210905.11
DO  - 10.11648/j.ogce.20210905.11
T2  - International Journal of Oil, Gas and Coal Engineering
JF  - International Journal of Oil, Gas and Coal Engineering
JO  - International Journal of Oil, Gas and Coal Engineering
SP  - 63
EP  - 70
PB  - Science Publishing Group
SN  - 2376-7677
UR  - https://doi.org/10.11648/j.ogce.20210905.11
AB  - Wettability alteration of the oil-wet reservoir rocks to the water-wet state is an important factor for enhanced oil recovery (EOR). One of the main challenges of applying nanoparticles for wettability alteration is related to the colloidal stability and poor adsorption of the nanofluids in the harsh conditions of the reservoirs. In the present work, comparative studies were followed between polymer-coated silica nanoparticles by polyethylene glycol (Mn ~ 2000) and amphiphilic polymer-coated silica nanoparticles by polyethylene glycol (Mn ~ 2000 or 5000) and propyl chains to determine wettability alteration and adsorption of these modified nanoparticles on porous media. Water contact angle and UV–Vis adsorption measurements showed which the efficiency of amphiphilic polymer-coated nanoparticles depends on the wettability state of glass and it was improved significantly by oil-wet glass substrates due to the existence of the hydrophobic polymer on the surface of the nanoparticles. Moreover, effective parameters including temperature, and pH were studied. The better performance was obtained for the modified silica nanoparticles by polyethylene glycol (Mn ~ 5000) and propyl chains at 1000 ppm concentration in pH of 6 and the temperature range of 25-55°C. Our study demonstrated amphiphilic polymer-coated silica nanoparticles can be considered as a promising agent which has the potential for EOR purposes.
VL  - 9
IS  - 5
ER  -

Copy | Download

Author Information

Hamid Daneshmand

Department of Physics, University of Tehran, Tehran, Iran

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Hamid Daneshmand. (2021). Effect of Temperature and PH on Wettability Alteration and Adsorption of Amphiphilic Polymer-Coated SiO2 Nanoparticle on Oil-Wet Porous Media. International Journal of Oil, Gas and Coal Engineering, 9(5), 63-70. https://doi.org/10.11648/j.ogce.20210905.11

Copy | Download

ACS Style

Hamid Daneshmand. Effect of Temperature and PH on Wettability Alteration and Adsorption of Amphiphilic Polymer-Coated SiO2 Nanoparticle on Oil-Wet Porous Media. Int. J. Oil Gas Coal Eng. 2021, 9(5), 63-70. doi: 10.11648/j.ogce.20210905.11

Copy | Download

AMA Style

Hamid Daneshmand. Effect of Temperature and PH on Wettability Alteration and Adsorption of Amphiphilic Polymer-Coated SiO2 Nanoparticle on Oil-Wet Porous Media. Int J Oil Gas Coal Eng. 2021;9(5):63-70. doi: 10.11648/j.ogce.20210905.11

Copy | Download

@article{10.11648/j.ogce.20210905.11,
  author = {Hamid Daneshmand},
  title = {Effect of Temperature and PH on Wettability Alteration and Adsorption of Amphiphilic Polymer-Coated SiO2 Nanoparticle on Oil-Wet Porous Media},
  journal = {International Journal of Oil, Gas and Coal Engineering},
  volume = {9},
  number = {5},
  pages = {63-70},
  doi = {10.11648/j.ogce.20210905.11},
  url = {https://doi.org/10.11648/j.ogce.20210905.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ogce.20210905.11},
  abstract = {Wettability alteration of the oil-wet reservoir rocks to the water-wet state is an important factor for enhanced oil recovery (EOR). One of the main challenges of applying nanoparticles for wettability alteration is related to the colloidal stability and poor adsorption of the nanofluids in the harsh conditions of the reservoirs. In the present work, comparative studies were followed between polymer-coated silica nanoparticles by polyethylene glycol (Mn ~ 2000) and amphiphilic polymer-coated silica nanoparticles by polyethylene glycol (Mn ~ 2000 or 5000) and propyl chains to determine wettability alteration and adsorption of these modified nanoparticles on porous media. Water contact angle and UV–Vis adsorption measurements showed which the efficiency of amphiphilic polymer-coated nanoparticles depends on the wettability state of glass and it was improved significantly by oil-wet glass substrates due to the existence of the hydrophobic polymer on the surface of the nanoparticles. Moreover, effective parameters including temperature, and pH were studied. The better performance was obtained for the modified silica nanoparticles by polyethylene glycol (Mn ~ 5000) and propyl chains at 1000 ppm concentration in pH of 6 and the temperature range of 25-55°C. Our study demonstrated amphiphilic polymer-coated silica nanoparticles can be considered as a promising agent which has the potential for EOR purposes.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Effect of Temperature and PH on Wettability Alteration and Adsorption of Amphiphilic Polymer-Coated SiO2 Nanoparticle on Oil-Wet Porous Media
AU  - Hamid Daneshmand
Y1  - 2021/10/05
PY  - 2021
N1  - https://doi.org/10.11648/j.ogce.20210905.11
DO  - 10.11648/j.ogce.20210905.11
T2  - International Journal of Oil, Gas and Coal Engineering
JF  - International Journal of Oil, Gas and Coal Engineering
JO  - International Journal of Oil, Gas and Coal Engineering
SP  - 63
EP  - 70
PB  - Science Publishing Group
SN  - 2376-7677
UR  - https://doi.org/10.11648/j.ogce.20210905.11
AB  - Wettability alteration of the oil-wet reservoir rocks to the water-wet state is an important factor for enhanced oil recovery (EOR). One of the main challenges of applying nanoparticles for wettability alteration is related to the colloidal stability and poor adsorption of the nanofluids in the harsh conditions of the reservoirs. In the present work, comparative studies were followed between polymer-coated silica nanoparticles by polyethylene glycol (Mn ~ 2000) and amphiphilic polymer-coated silica nanoparticles by polyethylene glycol (Mn ~ 2000 or 5000) and propyl chains to determine wettability alteration and adsorption of these modified nanoparticles on porous media. Water contact angle and UV–Vis adsorption measurements showed which the efficiency of amphiphilic polymer-coated nanoparticles depends on the wettability state of glass and it was improved significantly by oil-wet glass substrates due to the existence of the hydrophobic polymer on the surface of the nanoparticles. Moreover, effective parameters including temperature, and pH were studied. The better performance was obtained for the modified silica nanoparticles by polyethylene glycol (Mn ~ 5000) and propyl chains at 1000 ppm concentration in pH of 6 and the temperature range of 25-55°C. Our study demonstrated amphiphilic polymer-coated silica nanoparticles can be considered as a promising agent which has the potential for EOR purposes.
VL  - 9
IS  - 5
ER  -

Copy | Download